Filter
Top Products
REFERENCE
The simulator submenu
allows you to enable/disable
simulator mode, define a
starting position/altitude,
and define an initial ground
track and speed.
From a submenu, addi-
tional pull-down lists are
available, such as these
runway surface categories,
by highlighting the desired
item and pressing
††
.
65
SETUP MENU (cont.)
The following options are available from the setup menu:
• Simulator— allows you to enable and configure the
GPSMAP 195’s built-in simulator mode. From this submenu,
you can setup the simulator to a specific location and altitude,
plus enter the simulated speed and track.
• Alarms— offers complete control over the alarm clock,
arrival alarm and course deviation alarm settings. This sub-
menu also is used to enable/disable the various airspace alerts
and set a buffer altitude from the floor/ceiling limits of these
airspaces.
• Units / CDI
— is used to change the units of measure, heading
reference and the CDI scale.
• Position Format / Datum— is used to change the format in
which position readings are offered and the datum reference
used to determine where your position is.
• Nearest Airport Criteria— is used to set minimum surface
conditions and minimum runway lengths when viewing the
nearest airport list.
• Beeper / Display / Battery— lets you select if and when you
want the internal beeper to sound and how long the internal
display backlighting should remain on, and lets you adjust
the display contrast. This submenu is also used to designate
which battery type (alkaline or NiCad) is in use, for proper
battery gauge readings.
• Time— provides control over the format used to display time
and the option to display local time instead of UTC.
• Input/Output— allows you to control the interface settings
used to connect the GPSMAP 195 to external devices, such as
a personal computer or DGPS receiver.
Each setup submenu (with the exception of ‘Simulator’ and
‘Input/Output’) also features an options page which lets you quickly
reset the system setup options for that submenu to the factory default
settings.
To view the options for a setup submenu:
1. Press the
O
key (with one of the submenu pages displayed).
To restore the default settings:
1. Highlight the ‘Restore Defaults?’ option, and press
T
.
Main Menu: Setup
gps 195 manual C 7/1/99 4:49 PM Page 65