Filter
Top Products
REFERENCE
When the receiver has
been moved over 500
miles from the last known
position, it can be reini-
tialized from the map or
by entering coordinates.
This helps the GPSMAP
195 look for the correct
satellites.
For planning, learning, or
just plain fun, the simula-
tor mode can be easily
accessed from the status
page options.
48
STATUS PAGE OPTIONS
The GPSMAP 195’s status page features a context-sensitive options
page that provides access to settings and special features of that page.
To display the status page options:
1. Press
O
(with the status page displayed).
To select a menu option:
1. Highlight the desired option and press
T
.
The following options are available:
• Initialize Position?— allows you to initialize a starting
position for the receiver graphically or by text. See
page 13 for instructions on graphic initialization.
To initialize your position by text entry:
1. Highlight the ‘Initialize Position?’ option and press
T
. The map
display appears so that you can graphically select your position.
2. Press
O
to view the initialization options.
3. Highlight ‘Init As Text?’ and press
T
. The initialization window is
displayed.
4. Press
T
, enter the starting position altitude and press
T
.
5. Press
T
, enter the starting position coordinates and press
T
.
• Start AutoLocate?— allows the receiver to locate your
position automatically. This process may take up to five
minutes, but lets you avoid the initialization steps above.
• Track Up SkyView? or North Up SkyView?— allows you
to select between a north up or track up sky view display. A
north up display means the top of the screen is always north.
A track up display will reorient the top of the display to your
current ground track (direction of travel).
Status Page
gps 195 manual C 7/1/99 4:48 PM Page 48