Filter
Top Products
REFERENCE
‘Select Approach?’ allows
you to replace a destination
airport with those way-
points which comprise the
final course segment of an
approach for the airport.
To remove the approach
waypoints and replace them
with the airport reference
waypoint, select ‘Remove
Approach?’.
63
ACTIVE ROUTE PAGE OPTIONS (cont.)
The following options are available from the active route page:
• Select Approach?— allows you to select the final course
segment of a published approach, replacing the final desti-
nation airport in a GOTO or route with the sequence of way-
points for the selected approach. (Approach features are
described on pages 32 and 78.)
• Remove Approach?— removes the approach waypoints
from a GOTO or route, replacing them with the airport
reference waypoint.
• Reactivate Route?— reactivates the active route and selects
the route leg closest to your current position as the new
active leg. This feature is handy if you stray well off course
and later wish to return to the route.
• Invert Route?— reactivates the active route in reverse order
and begins navigation.
• Deactivate?— stops navigation of the route you are cur-
rently using.
• Edit On Map?— allows you to edit the selected route from
the map display. (See page 77 for specific instructions.)
• Delete Route?— allows you to clear all waypoints from the
selected route.
• Change Data Fields?— allows you to define the data dis-
played in the two user-selectable data fields. Four data
options are available:
• DIS– cumulative distance to waypoint(s)
• DTK– desired track
• ETE– estimated time enroute
• ETA– estimated time of arrival
To change a data field:
1. Highlight the ‘Change Data Fields?’ option and press
T
.
2. Highlight the data field you wish to change and press
T
.
3. Select the desired data field option and press
T
.
4. Press
Q
to remove the on-screen cursor.
• Restore Defaults?— resets all active route page options to
the factory default settings.
Active Route Page
gps 195 manual C 7/1/99 4:49 PM Page 63