Filter
Top Products
cGPSmapper Manual Map Project
http://cgpsmapper.com/ 26 of 100
τ
π
Zip=field_name
Name of the field - in the associated .dbf file - from which
cGPSmapper will get the Zip for each object.
Only used for polylines (i.e. when Type=RGN40 or
Type=64) and POIs (Type=RGN10 or Type=16).
RoadID=field_name
Unique ID number for the road. This is internally used by
cGPSmapper to maintain routing data creation.
Used for routing.
SpeedType=field_na
me
This attribute defines the maximum allowed speed - it is
used mainly for calculating fastest possible route.
There are 8 of them:
7 128 km/h
6 108 km/h - Can be adjusted in MapSource
5 93 km/h - Can be adjusted in MapSource
4 72 km/h - Can be adjusted in MapSource
3 56 km/h - Can be adjusted in MapSource
2 40 km/h - Can be adjusted in MapSource
1 20 km/h
0 8 km/h (ferry)
Used for routing.
RoadClass=field_na
me
This attribute defines the importance of the road for routing.
It is one of the most important attributes for routing.
The lowest importance is 0, the highest is 4.
Road class 4 should be used for Major highways and other
main roads.
Used for routing.
OneWay=field_name
1 one way road, where the permitted direction is
always from the beginning of the road to the end,
considering the digitalisation direction.
-1 one-way road, opposite to the digitalisation
direction.
0 two-way road.
Used for routing.
Toll=field_name
Defines that it is a toll road.
VehicleE=field_nam
e
1 no emergency vehicles allowed on the road.
VehicleD=field_nam
e
1 no delivery vehicles allowed on the road.
VehicleC=field_nam
e
1 no cars allowed on the road.
VehicleB=field_nam
e
1 no buses allowed on the road.
VehicleT=field_nam
e
1 no taxis allowed on the road.
VehicleP=field_nam
e
1 no pedestrians allowed on the road.