Filter
Top Products
80 GPSMAP
®
6000/7000 Series Owner’s Manual
Radar
VRM and EBL
The variable range marker (VRM) and the electronic bearing line (EBL) measure the distance and bearing
from your boat to a target object. On the Radar screen, the VRM appears as a circle that is centered on the
present location of your boat, and the EBL appears as a line that begins at the present location of your boat and
intersects the VRM. The point of intersection is the target of the VRM and the EBL.
Showing the VRM and the EBL
The VRM and the EBL congured for one mode are applied to all other radar modes.
1. From the Home screen, select .
2. Select , , , or .
3. Complete an action:
• Select > for Cruising, Harbor, or Offshore mode.
• Congure the setting for the short-range screen in Dual Range mode. Select > >
for the GPSMAP 6000 series. Select > for the GPSMAP 7000
series.
• Congure the setting for the long-range screen in Dual Range mode. Select > >
for the GPSMAP 6000 series. Select > for the GPSMAP 7000
series.
Adjusting the VRM and the EBL
You must show the VRM and the EBL before you can adjust them (page 80).
You can adjust the diameter of the VRM and the angle of the EBL, which moves the intersection point of the
VRM and the EBL. The VRM and the EBL congured for one mode are applied to all other radar modes.
1. From the Home screen, select .
2. Select , , , or .
3. Complete an action:
• Select >> for Cruising, Harbor, or Offshore Mode.
• Congure the setting for the short-range screen in Dual Range mode. Select > >
> for the GPSMAP 6000 series. Select > >
for the GPSMAP 7000 series.
• Congure the setting for the long-range screen in Dual Range mode. Select > >
> for the GPSMAP 6000 series. Select > >
for the GPSMAP 7000 series.
4. Select a new location for the intersection point of the VRM and the EBL:
• For the GPSMAP 6000 series, use the to select a new location.
• For the GPSMAP 7000 series, touch a new location.
5. Select .