Filter
Top Products
76 GPSMAP
®
6000/7000 Series Owner’s Manual
Radar
Enabling Timed Transmit
From the Home screen, select > > > > > .
Setting the Standby and Transmit Times
You must enable timed transmit before you can set the standby and transmit times (page 76).
To help conserve power, you can indicate the radar standby time and the transmit time to implement periodic
radar signal transmissions at set intervals.
1. From the Home screen, select > > > .
2. Select .
3. Enter the time interval between radar signal transmissions:
• For the GPSMAP 6000 series, use the or the .
• For the GPSMAP 7000 series, use the on-screen keyboard.
4. Select .
5. Select .
6. Enter the length of each radar signal transmission:
• For the GPSMAP 6000 series, use the or the .
• For the GPSMAP 7000 series, use the on-screen keyboard.
7. Select .
Enabling a Guard Zone
From the Home screen, select > > > > .
Dening a Partial Guard Zone
You must enable a guard zone before you can dene the boundaries of the zone (page 76).
You can dene the boundaries of a guard zone that does not completely encompass your boat.
1. From the Home screen, select > > > >
> >.
2. Adjust the location of the guard-zone corner:
• For the GPSMAP 6000 series, use the and the on-screen arrows (
and ).
• For the GPSMAP 7000 series, touch the guard-zone corner and drag.
3. Select and repeat step 2 to adjust the location of the second corner of the
guard zone.
4. Select .
Dening a Circular Guard Zone
You must enable a guard zone before you can dene the boundaries of the zone (page
76).
You can dene a circular guard zone that completely encompasses your boat.
1. From the Home screen, select > > > > >
> .
2. Select > > > > .
Corner 1
Corner 2