Filter
Top Products
52 GPSMAP
®
6000/7000 Series Owner’s Manual
Almanac, Environmental, and On-boat Data
4. Select the gauge limit you want to set (, , , or
).
5. Select .
6. Enter the gauge limit:
• For the GPSMAP 6000 series, use the .
• For the GPSMAP 7000 series, use the on-screen keyboard.
7. Repeat steps 4 through 6 to set additional gauge limits.
Activating Engine and Fuel Gauge Status Alarms
If you have activated gauge status alarms, when the engine sends a warning state message over the NMEA
2000 network, a gauge status alarm message appears. The gauge face or bar may become red depending on the
alarm type.
From the Home screen, select > > > > >.
Customizing Engine and Fuel Gauge Status Alarms
1. From the Home screen, select > > > > >
.
2. Select one or more engine gauge or fuel gauge alarms.
3. Select .
Selecting the Engine Gauge Type
You can set the type of gauges that appear on the rst engine gauge page. If you have one or two engines, you
can view either analog or digital gauges. If you have three or more engines, you can view only digital gauges.
From the Home screen, select > > > > .
Digital Gauges
Analog Gauges
Selecting the Number of Engines Shown in Gauges
The digital engine gauges can show information for up to four engines. The analog engine gauges can show
information for up to two engines.
1. From the Home screen, select > > > > >
.
2. Select the number of engines.
3. Select .