Filter
Top Products
30 GPSMAP
®
6000/7000 Series Owner’s Manual
Combinations
Editing a Data Field
1. From the Home screen, select .
2. Select a combination.
3. Select a data eld.
4. Select the type of data shown in the eld.
Available data options vary based on the chartplotter and network conguration.
Viewing Instrumentation Data
You can view engine gauges or fuel gauges in a combinations screen.
1. From the Home screen, select .
2. Select a combination.
3. Select > .
4. Select a numbered option.
5. Complete an action to show gauges in a combinations screen:
• Select > >to show engine gauges.
• Select > > to show fuel gauges.
Cycling Through Instrumentation Screens
1. From the Home screen, select .
2. Select a combination that contains a screen with instrumentation data.
3. Complete an action:
• For the GPSMAP 6000 series, select the icon in the lower-right corner that represents the gauge screen
you want to cycle through.
• For the GPSMAP 7000 series, select the left and right arrows beneath the gauge.
The chartplotter displays the next fuel gauge screen or engine gauge screen.
4. Repeat step 3 to cycle through all the gauge screens.
Customizing Instrumentation Data
See “Engine Gauges” (page 51) or “Fuel Gauges” (page 53).
Focusing on a Screen
The largest screen in a combinations screen is called the focus screen. In the GPSMAP 6000 series, you can
switch the content that appears in the focus screen.
1. From the Home screen, select .
2. Select a combination.
3. Select the icon in the lower-right corner that represents the screen you want to view in the focus screen.