Garmin 7000 GPS Receiver User Manual


  Open as PDF
of 136
 
68 GPSMAP
®
6000/7000 Series Owner’s Manual
Device Conguration
System Alarms
Setting the Clock Alarm
You can set an alarm using the system (GPS) clock.
1. From the Home screen, select  >  > > > .
2. Enter the time that triggers the alarm:
• For the GPSMAP 6000 series, use the  or the .
• For the GPSMAP 7000 series, use the on-screen keyboard.
3. Select .
Setting the Unit Voltage Alarm
You can set an alarm to sound when the battery reaches a specied low voltage.
1. From the Home screen, select  >  > >  >.
2. Enter the voltage that triggers the alarm:
• For the GPSMAP 6000 series, use the or the .
• For the GPSMAP 7000 series, use the on-screen keyboard.
3. Select .
Setting the GPS Accuracy Error Alarm
You can set an alarm to sound when the GPS location accuracy falls outside the user-dened value.
1. From the Home screen, select  >  > > >.
2. Enter the GPS location accuracy that triggers the alarm:
• For the GPSMAP 6000 series, use the or the .
• For the GPSMAP 7000 series, use the on-screen keyboard.
3. Select .
Setting the Total Fuel Onboard Alarm
The chartplotter must be connected to an external fuel sensor to capture fuel economy data.
You can set an alarm to sound when the total amount of remaining onboard fuel reaches the level you specify.
1. From the Home screen, select  >  > > > .
2. Enter the amount of fuel that triggers the alarm:
• For the GPSMAP 6000 series, use the  or the .
• For the GPSMAP 7000 series, use the on-screen keyboard.
3. Select .
Collision Alarm
See “Setting the Safe-zone Collision Alarm” (page 17).
 previous next