Filter
Top Products
60 GPSMAP
®
6000/7000 Series Owner’s Manual
Device Conguration
Shoreline Distance Auto Guidance Setting
The Shoreline Distance setting indicates how close to the shore you want the Auto Guidance line to be placed.
The Auto Guidance line may move if you change this setting while navigating.
Setting the Distance from Shore
The available values for the Shoreline Distance setting (Nearest, Near, Normal, Far, or Farthest) are relative,
not absolute. To ensure that the Auto Guidance line is placed an appropriate distance from shore, you can
assess the placement of the Auto Guidance line using one or more familiar destinations that require navigation
through a narrow waterway.
1. Dock your boat or drop anchor.
2. From the Home screen, select > > > >
> .
3. Select a destination that you have navigated to previously:
• For the GPSMAP 6000 series, use the to select the destination using the
cursor ( ).
• For the GPSMAP 7000 series, touch the navigation chart to select the destination using the cursor ( ).
4. Select >.
5. Review the placement of the Auto Guidance line. Determine whether the line safely avoids known
obstacles, and whether the turns enable efcient travel.
6. Complete an action:
• If the placement of the Auto Guidance line is satisfactory, select > >
. Proceed to step 10.
• If the Auto Guidance line is too close to known obstacles, from the Home screen, select >
> > > > .
• If the turns in the Auto Guidance line are too wide, from the Home screen, select >
> > > > .
7. If you selected or in step 6, review the placement of the Auto Guidance line. Determine whether
the line safely avoids known obstacles, and whether the turns enable efcient travel.
Auto Guidance maintains a wide clearance from obstacles in open water, even if you set the Shoreline
Distance setting to or . As a result, the chartplotter may not reposition the Auto Guidance
line, unless the destination selected in step 3 requires navigation through a narrow waterway.
8. Complete an action:
• If the placement of the Auto Guidance line is satisfactory, select > >
. Proceed to step 10.
• If the Auto Guidance line is too close to known obstacles, from the Home screen, select >
> > > > .
• If the turns in the Auto Guidance line are too wide, from the Home screen, select >
> > > > .