Filter
Top Products
62 GPSMAP
®
6000/7000 Series Owner’s Manual
Device Conguration
• Select > to set the time zone manually. For the GPSMAP 6000 series, use the
or the to enter the time zone hour adjustment. For the GPSMAP 7000 series,
use the on-screen keyboard. Select .
• Select . Select , , or.
Units of Measure
You can set the units of measure the chartplotter shows, using a standardized system of measurements or
creating a customized system of measurements.
Selecting a Standardized System of Measurement
1. From the Home screen, select >> > .
2. Select (mh, ft, ºF), (kh, m, ºC), or (kt, ft, ºF).
Creating a Customized System of Measurement
You must be receiving NMEA Sonar depth data or using a Garmin sounder module in order to view depth and
temperature information.
You can select individual units of measure to create a customized system of measurement for your chartplotter
display.
1. From the Home screen, select > > > > .
2. Complete an action:
• Select , and select ,, or.
• Select , and select or .
• Select , and select ,, or .
• Select > , and select , , or .
• Select > , and select , , or .
• Select , and select or .
• Select , and select , , or .
• Select > , and select or .
• Select > , and select or .
Data Bars
Data bars can appear on specic charts and 3D chart views, and they provide real-time, at-a-glance
information. A data bar congured to appear on one chart or one 3D chart view does not appear on another
chart or on another 3D chart view. The data bars for each chart or each 3D chart view must be congured
separately.
The cruising, navigation, shing, fuel, sailing, and compass tape data bars are available on all charts and 3D
chart views.
: The Fishing chart, Mariner’s Eye 3D, and Fish Eye 3D are available with a preprogrammed BlueChart
g2 Vision data card.