Filter
Top Products
66 GPSMAP
®
6000/7000 Series Owner’s Manual
Device Conguration
Conguring the Appearance of Other Vessels
: The Fishing chart and Mariner’s Eye 3D are available with a preprogrammed BlueChart g2 Vision
data card.
1. From the Home screen, select .
2. Select , , , or .
3. Select > > .
4. Complete an action:
• Select to indicate the distance from your location within which AIS vessels appear.
Select a distance.
• Select > to show information about MARPA-tagged vessels.
• Select > to show details about other vessels.
• Select to set the projected heading time for MARPA-tagged vessels. For the GPSMAP
6000 series, use the or the to enter the heading. For the GPSMAP 7000
series, use the on-screen keyboard. Select .
• Select to show the tracks of AIS vessels. Select the length of the track that appears using a trail.
Information about Your Boat
Calibrating a Water Speed Device
If you have a speed-sensing transducer, you can calibrate that speed-sensing device.
1. From the Home screen, select > > .
2. Follow the on-screen instructions.
If the boat is not moving fast enough or the speed sensor is not registering a speed, a “Speed too
low”message appears. Select , and safely increase the boat speed. If the message appears again, stop
the boat, and ensure that the speed-sensor wheel is not stuck. If the wheel turns freely, check the cable
connections. If you continue to get the message, contact Garmin Product Support.
Setting the Fuel Capacity of Your Boat
1. From the Home screen, select > > .
2. Enter the combined fuel capacity of all the engines on your boat:
• For the GPSMAP 6000 series, use the or the .
• For the GPSMAP 7000 series, use the on-screen keyboard.
3. Select .