94 Command Groups
IPv6 ACL
IPv6 MLD Snooping
show arp switch Displays
the entries in the ARP table.
PE
show hosts Displays the default domain name, a list of
name server hosts, static and cached list of host
names and addresses.
UE
show ip address-conflict Displays the status information corresponding
to the last detected address conflict.
UE or
PE
show ip helper-address Displays the ip helper addresses configuration. PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.
{deny | permit} Creates a new rule for the current IPv6 access
list.
v6ACL
ipv6 access-list Creates an IPv6 Access Control List (ACL)
consisting of classification fields defined for the
IP header of an IPv6 frame.
GC
ipv6 access-list rename Changes the name of an IPv6 ACL. GC
ipv6 traffic-filter Attaches a specific IPv6 ACL to an interface or
associates it with a VLAN ID in a given
direction.
GC
IC
show ipv6 access-lists Displays an IPv6 access list (and the rules
defined for it).
PE
Command Description Mode
a
ipv6 mld snooping
immediate-leave
Enables or disables MLD Snooping immediate-
leave admin mode on a selected interface or
VLAN.
IC
VLAN
ipv6 mld snooping
groupmembership-interval
Sets the MLD Group Membership Interval
time on a VLAN or interface.
IC
VLAN
Command Description Mode
a
2CSPC4.XModular-SWUM200.book Page 94 Thursday, March 10, 2011 11:18 AM
