QoS Commands 601
assign-queue
Use the assign-queue command in Policy-Class-Map Configuration mode to
modify the queue ID to which the associated traffic stream is assigned.
Syntax
assign-queue
queueid
•
queueid
— Specifies a valid queue ID. (Range: integer from 0–6.)
Default Configuration
This command has no default configuration.
Command Mode
Policy-Class-Map Configuration mode
User Guidelines
This command has no user guidelines.
classofservice trust match dstip match vlan show diffserv service
brief
conform-color match dstip6 mirror show interfaces cos-
queue
cos-queue min-
bandwidth
match dstl4port police-simple show interfaces
random-detect
cos-queue random-
detect
match ethertype policy-map show policy-map
cos-queue strict match ip6flowlbl redirect show policy-map
interface
diffserv match ip dscp service-policy show service-policy
drop match ip
precedence
show class-map traffic-shape
2CSPC4.XModular-SWUM200.book Page 601 Thursday, March 10, 2011 11:18 AM
