A SERVICE OF

logo

1542 System Management Commands
Example
console(config-stack)#initiate failover ?
<cr> Press enter to execute the command.
console(config-stack)#initiate failover
Management unit will be reloaded.
Are you sure you want to failover to the backup unit?
(y/n) y
ip address
Use the ip address command to set a static OOB port IP address.
Syntax
ip address
addr
mask
gw
addr
— IP address to be set for the OOB port. (Range: Valid IP address)
mask
— Subnet mask. (Range: Valid mask)
gw
— Gateway IP address. (Range: Valid gateway IP address)
Command Mode
Interface Configuration (out-of-band)
Default Configuration
This command has no default configuration.
User Guidelines
No specific guidelines.
Example
console(config-if)#ip address 10.240.4.115
255.255.255.0 10.240.4.1
2CSPC4.XModular-SWUM200.book Page 1542 Thursday, March 10, 2011 11:18 AM