A SERVICE OF

logo

Open as PDF
next previous
System Management Commands 1579
console#
show system id
Use the show system id command in User EXEC mode to display the system
identity information.
Syntax
show system id [
unit
]
•
unit
— The unit number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
The tag information is on a switch by switch basis.
Example
The following example displays the system service tag information.
console>show system id
Service Tag: 89788978
Serial number: 8936589782
Asset tag: 7843678957
Unit Service tag Serial number Asset tag
----- ------------ -------------- -----------
1 89788978 8936589782 7843678957
2 4254675 3216523877 5621987728
2CSPC4.XModular-SWUM200.book Page 1579 Thursday, March 10, 2011 11:18 AM