QoS Commands 629
mirror
Use the mirror command in Policy-Class-Map Configuration mode to mirror
all the data that matches the class defined to the destination port specified.
Syntax
mirror
interface
•
interface
— Specifies the Ethernet port to which data needs to be copied.
Default Configuration
This command has no default configuration.
Command Mode
Policy-Class-Map Configuration mode
User Guidelines
The port identified in this command is identical to the destination port of the
monitor command.
Example
The following example displays how to copy all the data to port 1/0/5.
console(config-policy-classmap)#mirror 1/0/5
police-simple
Use the police-simple command in Policy-Class-Map Configuration mode to
establish the traffic policing style for the specified class. The simple form of
the police command uses a single data rate and burst size, resulting in two
outcomes: conform and nonconform.
Syntax
police-simple {
datarate
burstsize
conform-action {drop | set-prectransmit
cos
| set-dscp-transmit
dscpval
| transmit} [violateaction {drop | set-cos-
transmit
cos
| set-prec-transmit
cos
| set-dscp-transmit
dscpval
| transmit}]}
2CSPC4.XModular-SWUM200.book Page 629 Thursday, March 10, 2011 11:18 AM
