1564 System Management Commands
Example
The following example displays a list of open telnet sessions to remote hosts.
console#show sessions
Connection Host Address Port
---------- ------------ ----------- ------
1 Remote switch 172.16.1.1 23
2 172.16.1.2 172.16.1.2 23
The following table describes the significant fields shown in the display.
show slot
Use the show slot command in User EXEC mode to display information
about all the slots in the system or for a specific slot.
Syntax
show slot [
slot/port
]
The following table explains the output parameters.
Field Description
Connection Connection number
Host Remote host to which the switch is connected
through a Telnet session
Address IP address of the remote host
Port Telnet TCP port number
Parameter Description
Slot The slot identifier in a slot/port format.
Slot Status The slot is empty, full, or has encountered
an error.
2CSPC4.XModular-SWUM200.book Page 1564 Thursday, March 10, 2011 11:18 AM
