QoS Commands 621
•
label
- The value to match in the Flow Label field of the IPv6 header
(Range 0-1048575).
Default Configuration
There is no default configuration for this command.
Command Mode
Ipv6-Class-Map Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example adds a rule to match packets whose IPv6 Flow Label
equals 32312.
console(config-classmap)#match ip6flowlbl 32312
match ip dscp
Use the match ip dscp command in Class-Map Configuration mode to add to
the specified class definition a match condition based on the value of the IP
DiffServ Code Point (DSCP) field in a packet. This field is defined as the
high-order six bits of the Service Type octet in the IP header. The low-order
two bits are not checked.
Syntax
match ip dscp
dscpval
•
dscpval
— Specifies an integer value or a keyword value for the DSCP
field. (Integer Range: 0–63) (Keyword Values:
af11
,
af12
,
af13
,
af21
,
af22
,
af23
,
af31
,
af32
,
af33
,
af41
,
af42
,
af43
,
be
,
cs0
,
cs1
,
cs2
,
cs3
,
cs4
,
cs5
,
cs6
,
cs7
,
ef
)
Default Configuration
This command has no default configuration.
2CSPC4.XModular-SWUM200.book Page 621 Thursday, March 10, 2011 11:18 AM
