DHCP Server and Relay Agent Commands 815
console(config-dhcp-pool)#network 192.168.21.0 /24
console(config-dhcp-pool)#domain-name power-
connect.com
console(config-dhcp-pool)#dns-server 192.168.22.3
192.168.23.3
console(config-dhcp-pool)#netbios-name-server
192.168.22.2 192.168.23.2
console(config-dhcp-pool)#netbios-node-type h-node
console(config-dhcp-pool)#lease 2 12
console(config-dhcp-pool)#default-router 192.168.22.1
192.168.23.1
bootfile
Use the bootfile command in DHCP Pool Configuration mode to set the
name of the image for the DHCP client to load. Use the no form of the
command to remove the bootfile configuration. Use the show ip dhcp pool
command to display pool configuration parameters.
Syntax
bootfile
filename
no bootfile
Parameter Description
Default Configuration
There is no default bootfile filename.
Command Mode
DHCP Pool Configuration mode
Parameter Description
filename The name of the file for the DHCP client to load.
2CSPC4.XModular-SWUM200.book Page 815 Thursday, March 10, 2011 11:18 AM
