1028 Multicast Commands
Syntax
ip pim register-rate-limit
0-2000
no ip pim register-rate-limit
Parameter Description
Default Configuration
The default threshold is 0. This indicates that the register limit is infinite.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
console(config)#ip pim register-rate-limit 10
ip pim rp-address
Use the ip pim rp-address command in Global Configuration mode to define
the address of a PIM Rendezvous point (RP) for a specific multicast group
range. Use the no form of this command to remove a configured RP. This
command replaces the ip pimsm rp-address command.
Syntax
ip pim rp-address {
rp-address group-address group-mask
[ override ]}
no ip pim rp-address {
rp-address group-address group-mask}
Parameter Description
register-rate-limit The PIM register message limit in kilobytes per second. Range
0-2000.
2CSPC4.XModular-SWUM200.book Page 1028 Thursday, March 10, 2011 11:18 AM
