A SERVICE OF

logo

System Management Commands 1581
show system temperature
Use the show system temperature command in User EXEC or Privileged
EXEC mode to display information about the system temperature and fan
status.
Syntax
show system temperature
Parameter Description
This command does not require a parameter description.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC
User Guidelines
Temperature status is indicated as per the following table:
Examples
console>show system temperature
Temperature Sensors:
Unit Description Temperature Status
Status Degrees Celsius
Good 0-50
Medium 51-74
High 75-200
2CSPC4.XModular-SWUM200.book Page 1581 Thursday, March 10, 2011 11:18 AM