Multicast VLAN Registration Commands 557
console(config-if-Gi1/0/1)#interface Gi1/0/24
console(config-if-Gi1/0/24)#switchport mode trunk
console(config-if-Gi1/0/24)#switchport trunk native vlan 99
console(config-if-Gi1/0/24)#switchport trunk allowed vlan add 99
console(config-if-Gi1/0/24)#mvr
console(config-if-Gi1/0/24)#mvr type source
console(config-if-Gi1/0/24)#exit
mvr vlan group
Use the mvr vlan group command in Interface Config mode to participate in
the specific MVR group. Use the no form of this command to remove the
port participation from the specific MVR group.
Syntax
mvr vlan
mVLAN
group
A.B.C.D
no mvr vlan
mVLAN
group
A.B.C.D
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Interface Config
Parameter Description
VLAN The VLAN over which multicast data from the specified group
is to be received.
A.B.C.D. The multicast group for which multicast data is to be received
over the specified VLAN.
2CSPC4.XModular-SWUM200.book Page 557 Thursday, March 10, 2011 11:18 AM
