IPv6 Multicast Commands 1049
53
IPv6 Multicast Commands
This chapter explains the following commands:
ipv6 pimsm (Global config)
Use the ipv6 pimsm command to administratively enable PIMSM for IPv6
multicast routing. Use the "no" form of this command to disable PIMSM for
IPv6.
Syntax
ipv6 pimsm
no ipv6 pimsm
Default Configuration
IPv6 PIMSM is disabled on the router by default.
Command Mode
Global Configuration mode
ipv6 pimsm (Global config) ipv6 pimsm rp-candidate
ipv6 pimsm (VLAN Interface config) ipv6 pimsm spt-threshold
ipv6 pimsm bsr-border ipv6 pimsm ssm
ipv6 pimsm bsr-candidate show ipv6 pimsm
ipv6 pimsm dr-priority show ipv6 pimsm bsr
ipv6 pimsm hello-interval show ipv6 pimsm interface
ipv6 pimsm join-prune-interval show ipv6 pimsm neighbor
ipv6 pimsm register-threshold show ipv6 pimsm rphash
ipv6 pimsm rp-address show ipv6 pimsm rp mapping
2CSPC4.XModular-SWUM200.book Page 1049 Thursday, March 10, 2011 11:18 AM
