654 RADIUS Commands
aaa accounting network default start-stop group
radius
Use the aaa accounting network default start-stop group radius command to
enable RADIUS accounting on the switch. Use the “no” form of this
command to disable RADIUS accounting.
Syntax
aaa accounting network default start-stop group radius
no aaa accounting network default start-stop group radius
Default Configuration
RADIUS accounting is disabled by default.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#aaa accounting network default start-
stop group radius
auth-port radius-server deadtime show aaa servers
deadtime radius-server host show radius statistics
key radius-server key source-ip
msgauth radius-server retransmit timeout
name (RADIUS server) radius-server source-ip usage
2CSPC4.XModular-SWUM200.book Page 654 Thursday, March 10, 2011 11:18 AM
