1488 SNMP Commands
Default Configuration
SNMP authentication, link, multiple-user, spanning-tree, dot1q, mac lock
violation, and ACL traps are enabled by default.
Command Mode
Global Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the options for the snmp-server enable traps
command.
console(config)#snmp-server enable traps ?
<cr> Press enter to execute the command.
acl acl
all Enable/Disable all Traps.
authentication To enable the device to send SNMP
traps when
authentication fails.
dvmrp dvmrp
link Enable/Disable switch level Link
Up/Down trap flag.
pim Enable pim traps (pim-sm and pim-dm).
poe Enable poe traps.
snmp authentication Enable snmp authentication traps.
spanning-tree Enable traps on topology changes.
stack Enable stack firmware synchronization traps.
vrrp Enable vrrp traps.
Parameter Description
2CSPC4.XModular-SWUM200.book Page 1488 Thursday, March 10, 2011 11:18 AM
