ACL Commands 253
User Guidelines
Use this command to create a mac access control list. The CLI mode is
changed to Mac-Access-List Configuration when this command is
successfully executed.
Example
The following example creates MAC ACL and enters MAC-Access-List-
Configuration mode.
console(config)#mac access-list extended LVL7DELL
console(config-mac-access-list)#
mac access-list extended rename
Use the mac access-list extended rename command in Global Configuration
mode to rename the existing MAC Access Control List (ACL).
Syntax
mac access-list extended rename
name newname
•
name
— Existing name of the access list. (Range: 1-31 characters)
•
newname
— New name of the access list. (Range: 1-31 characters)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
Command fails if the new name is the same as the old one.
Example
The following example shows the mac access-list extended rename
command.
2CSPC4.XModular-SWUM200.book Page 253 Thursday, March 10, 2011 11:18 AM
