IGMP Commands 881
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example sets at 10 seconds the interval between general queries
sent at startup for VLAN 15.
console(config)#interface vlan 15
console(config-if-vlan15)#ip igmp startup-query-
interval 10
ip igmp version
Use the ip igmp version command in Interface Configuration mode to
configure the version of IGMP for an interface.
Syntax
ip igmp version
version
•
version
— IGMP version. (Range: 1-3)
Default Configuration
The default version is 3.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example configures version 2 of IGMP for VLAN 15.
console#interface vlan 15
2CSPC4.XModular-SWUM200.book Page 881 Thursday, March 10, 2011 11:18 AM
