A SERVICE OF

logo

Port Channel Commands 581
lacp auto
Use the lacp auto command to set the LACP (Link Aggregation) mode to
dynamic for that Aggregator Group. This means that when more than one
uplink port is in the Group, those uplink ports will be enabled automatically
with dynamic LACP.
Syntax
lacp auto
Default Configuration
This command has no default configuration.
Command Mode
Port Aggregator mode
User Guidelines
This command has no user guidelines.
Example
console(config)#port-aggregator group 2
console(config-aggregator-2)#lacp auto
console(config-aggregator-2)#
lacp off
Use the lacp off command to set the LACP (Link Aggregation) mode to off
for that Aggregator Group. This means that when more than one uplink port
is in the Group, all the uplinks are shut down except the lowest numbered
one.
Syntax
lacp off
2CSPC4.XModular-SWUM200.book Page 581 Thursday, March 10, 2011 11:18 AM