Command Groups 145
Command Line Configuration Scripting
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.
Configuration and Image Files
script apply Applies commands in the script to the switch. PE
script delete Deletes a specific script. PE
script list Lists all scripts present in the switch. PE
script show Displays the contents of a script file. PE
script validate Validates a script file. PE
Command Description Mode
a
boot system Specifies the system image that the switch loads
at startup.
PE
clear config Restores switch to default configuration. PE
copy Copies files from a source to a destination. PE
delete backup-image Deletes a file from a flash memory. PE
delete backup-config Deletes the backup configuration file. PE
delete startup-config Deletes the startup configuration file. PE
dir Prints the contents of the flash file system. PE
erase Erases the startup configuration, the backup
configuration, or the backup image.
PE
filedescr Adds a description to a file. PE
rename Renames the file present in flash. PE
show backup-config Displays contents of a backup configuration
file.
PE
show bootvar Displays the active system image file that the
switch loads at startup.
UE
show running-config Displays the contents of the currently running
configuration file.
PE
show startup-config Displays the startup configuration file contents. PE
2CSPC4.XModular-SWUM200.book Page 145 Thursday, March 10, 2011 11:18 AM
