A SERVICE OF

logo

DHCP Server and Relay Agent Commands 837
Syntax
sntp
ip-address
no sntp
Parameter Description
Default Configuration
There is no default IPv4 NTP server configured.
Command Mode
DHCP Pool Configuration mode
User Guidelines
Use the show ip dhcp pool command to display pool configuration
parameters. The IPv4 address of the NTP server is conveyed in the Option 42
TLV of the DHCP OFFER, DHCP ACK, DHCP INFORM ACK and DHCP
BOOTREPLY messages.
Example
console(config-dhcp-pool)#sntp 192.168.21.2
show ip dhcp binding
Use the show ip dhcp binding command in Privileged EXEC mode to display
the configured DHCP bindings.
Syntax
show ip dhcp binding [address]
Parameter Description
ip-address The IPv4 address of the NTP server to use for time services.
2CSPC4.XModular-SWUM200.book Page 837 Thursday, March 10, 2011 11:18 AM