814 DHCP Server and Relay Agent Commands
• Client DNS server – dns-server
• NetBIOS WINS Server – netbios-name-server
• NetBIOS Node Type – netbios-node-type
• Client default router – default-router
• Client address lease time – lease
Administrators may also configure manual bindings for clients using the in
DHCP Pool Configuration mode. This is the most often used for DHCP
clients for which the administrator wishes to reserve an ip address, for
example a computer server or a printer. A DHCP pool can contain automatic
or dynamic address assignments or a single static address assignment.
To configure a manual address binding, configure the pool properties using
the DHCP pool commands listed below. It is only necessary to configure a
DHCP client identifier or a BOOTP client MAC address for a manual
binding. To configure a manual binding, the client identifier or hardware
address must be specified before specifying the host address.
• DHCP client identifier – client-identifier
• BOOTP client MAC address – hardware-address
• Host address – host
• Client name (optional) – client-name
Examples
Example 1 – Manual Address Pool
console#ip dhcp pool “Printer LP32 R1-101”
console(config-dhcp-pool)#client-identifier
00:23:12:43:23:54
console(config-dhcp-pool)#host 10.1.1.1
255.255.255.255
console(config-dhcp-pool)#client-name
PRT_PCL_LP32_R1-101
Example 2 – Dynamic Address Pool
console(config)#ip dhcp pool "Windows PCs"
2CSPC4.XModular-SWUM200.book Page 814 Thursday, March 10, 2011 11:18 AM
