Filter
Top Products
59
Default: No protection
20.Power Key
This option allows you to change how the PWR button
operates in turning MobileMapper on or off. Two choices
are possible:
-
No protection: this is the normal case of use. With this
option enabled, you will have to press the PWR but-
ton to turn MobileMapper on. You will press the
PWR button again to turn MobileMapper off.
-
On/Off protected: To turn MobileMapper on with this
option enabled, you will have to press and hold the
PWR button until the first screen is displayed. To turn
it off, you will have to press the PWR button, and
then press the ENTER button before the power off
timer is done.
After selecting the
Power Key option from the Setup
menu, use the up/down arrow to highlight the desired
choice and then press ENTER.
21.Simulate
This option allows you to set the simulator. It shows you how
MobileMapper uses its various functions based on a simulat-
ed journey. The simulator is useful for learning or demon-
strating MobileMapper functions when indoors and there is
no GPS reception. When the simulator is on, MobileMapper
quits normal operation to operate in the simulator mode. You
can choose one of the following three options when you ac-
cess the
Simulate option:
-
Off: Will turn the simulator off. MobileMapper will
return to normal operation
-
Auto: Will turn the simulator on. A predefined head-
ing and speed rate will be used.
-
User: Will turn the simulator on. A user-defined head-
ing and speed rate will be used.