Filter
Top Products
110
- Click on the button located on the right of the Geo-
detic Datum
combo box. This opens a new dialog box
in which you should enter the name of the new datum
and specify the ellipsoid used as well as the possible
shifts and rotations.
- Then click
OK to close this dialog box.
- Click
OK again to close the Coordinate System dialog
box and make the newly defined system the currently
used coordinate system in MobileMapper Office.
2. Creating a new Grid system
- Click the down arrow on the right of the
System Type
combo box and highlight
Grid. Then click the down
arrow on the right of the
Grid System combo box and
highlight the first option in the list (
NEW).
- Click on the button located on the right of the
Grid
System
combo box. This opens a new dialog box in
which you should enter the name of the new grid sys-
tem (
System Name field) and define the working zone
for the grid systems as explained below.
- Click on the button located on the right of the
Zone
combo box.
You can also create a
new ellipsoid according
to the same principle as
the datum itself, i.e. by
selecting the NEW option
on top of the Ellipsoid
combo box list and then
clicking the button to
enter its characteristics.