Thales Navigation Mobile Mapper GPS Receiver User Manual


 
40
Selecting a POI as the Destination Point
Press MENU, scroll to the GOTO option and press ENTER.
The possible categories of POIs are now listed on the screen.
Select the category the destination point belongs to.
Before pressing ENTER to list all the points stored in this
category, choose how you want these points to be listed by
setting the
Find By field. Press the left/right arrow to set this
field. Two values are possible in this field:
-
Alphabetical: Points will be listed in alphabetical order.
MobileMapper will then help you find the desired point
through one of the following two methods: Keyboard
Search and Alphabetic Scroll.
Keyboard Search: Before displaying the list of points in
alphabetical order, MobileMapper displays a keyboard
that you can use to enter the first few characters of the
point you are looking for. When you highlight
OK and
press ENTER, (or as a shortcut, press IN), you are taken
to the alphabetical list with the point you began typing at
the top of the display. Anytime you are viewing the list
of points, you can re-access the keyboard by pressing
ESC.
Alphabetic Scroll: You can use the IN and OUT buttons
to step up or down the alphabet. If you were viewing
points beginning with the letter “A”, pressing OUT
would take you to the first waypoint beginning with “B”,
and then “C” and so forth. Pressing IN does the same
function but only in reverse.
-
Nearest To: Only the 20 points from this category the clos-
est to your position will be listed.
When these 20 points are listed, MobileMapper indicates
the bearing and distance to your current position from the
first point in the list. You can change the point from
which the nearest points are found. With the
Nearest To
field now highlighted, press ENTER and scroll to the
category where this new point can be found. Select a new
point and press ENTER.
NOTE: If you have
already pressed the
arrow keys and one of the
nearest points in the list
is highlighted, use the
ESC button to scroll back
to the Nearest To field