Filter
Top Products
55
Default North
Reference: True
Default: The appropri-
ate daylight saving time
(United States and Euro-
pean Union only) will
automatically be set dur-
ing startup when you use
mobileMapper for the
first time.
11.North Reference
This option allows you to define the type of North refer-
ence you want MobileMapper to use. This can be True
North, Magnetic North, Military True North or Military
Magnetic North.
After selecting the
North Reference option from the Setup
menu, choose the desired North Reference from the dis-
played list and then press ENTER.
12.Daylight Saving
This option allows you to select the region where you are
located so that MobileMapper can automatically adjust
the time displayed to compensate for daylight saving
time. You can select one of three possible regions:
-
United States: Daylight saving starts on the first Sun-
day in April and ends on the last Sunday in October
-
European Union: Daylight saving starts on the last Sun-
day in March and ends on the last Sunday in October
-
Customize: this option allows you to set the month and
day that daylight saving starts and ends in your area.
After selecting the
Daylight saving option from the Setup
menu, press ENTER again to list the three available
regions. Choose one using the up/down arrow and then
press ENTER. Press ESC to come back to the Setup
Menu screen. If you chose
Customize, first set all the dis-
played fields according to your local daylight saving
times before pressing ESC.