Filter
Top Products
24
- Press ENTER to ask MobileMapper to guide you to this
feature. If you simply press ENTER, you will make the
selected feature your destination and all the navigation
screens will be set to help you reach that feature. Press
NAV to access any of these screens. On the Map screen,
you can now see a straight line connecting your current
destination to the selected feature.
- Walk to the feature according to the navigation instruc-
tions provided on the Map screen. You can use other nav-
igation screens if you prefer (see also Navigation Screens
chapter from page 26). You will know when you are
close to the feature when the distance to the feature goes
to zero or close to zero, or simply because you can iden-
tify it visually. Another nice way of being informed that
you have arrived at the feature is to set the
Alarms option
(see explanations on page 54)
- After arriving at the feature, press the LOG button. This
takes you back to the Selected screen.
- Now that you are near the feature, highlight the
Edit field
and press ENTER. You are now allowed to edit each of
the feature’s attributes.
- After reviewing the attributes that need to be changed,
highlight the
Close field at the bottom of the screen and
press ENTER. This ends the review of this feature and
displays the Map screen again.
- Follow the same 7 steps described above to revisit and
update the other features present in the job.
Map screen showing
straight line to target