Filter
Top Products
53
Default time format:
Local AM/PM
Default units: km/m/kph/
hectares
8. Time Format
This option allows you to select the time format you
want to use in MobileMapper. You can choose from three
different time formats: Local 24Hrs, Local AM/PM or
UTC.
After selecting the
Time Format option from the Setup
menu, choose the time format that suits you and then
press ENTER.
If you have selected
Local 24 Hrs or Local AM/PM, you will
be prompted to enter your local time.
9. Units
This option allows you to select the units of measure-
ment that will be used when displaying navigational data
or features being logged.
All sets of units are formatted as follows:
long distance
unit/short distance unit/speed unit/area unit
.You can select
from 5 different sets of units.
You can also create your own set of units by selecting
Advanced at the end of the list. You are then prompted to
specify the unit you wish to use for each type of possible
measure, i.e. Distance, Speed, Elevation, Bearing and
Area.
After selecting the
Units option from the Setup menu,
choose a set of units from the displayed list and then
press ENTER. If you have selected
Advanced, a new list
appears prompting you to choose a unit for each type of
measure. Select the first measure in the list, press
ENTER, choose a unit and press ENTER again. This
takes you back to the former screen where you can select
the second measure, etc. When all units are defined,
press ESC to come back to the Setup menu.