Filter
Top Products
57
16.Beeper
This option allows you to select which actions will cause
the beeper to sound. You can select one of the following
choices:
-
Off (beeper will never sound)
-
Keys Only (pressing a key causes a beep)
-
Alarms Only (when an alarm is activated)
-
Keys & Alarms (beeper will sound when a key is
pressed or an alarm is activated)
After selecting the
Beeper option from the Setup menu,
use the up/down arrow to highlight the desired choice
and then press ENTER.
17.Clear Memory
This option allows you to clear one of the following data
sets from MobileMapper’s memory:
-
Track history: Will clear the track history displayed on
the Map screen from memory
-
Wpts/Routes: Will clear all waypoints and routes from
memory
-
Routes: Will clear all routes from memory
-
Reset default: Will reset the receiver by restoring all
factory defaults
-
All: Will clear all memory
After selecting the
Clear Memory option from the Setup
menu, use the up/down arrow to highlight the desired
choice and then press ENTER. MobileMapper will ask
you to confirm your choice. If you have selected
All,
MobileMapper will then shut off. The next time it is
turned on, it will prompt you that it needs to be initial-
ized.