Filter
Top Products
Magellan NAV 6000 69
DC
Power
Black*
Red*
(+)
(-)
DC Power/RS-232
Data Cable
NMEA
Device
Black*
Orange or White
(+)
(-)
External
Alarm
Blue or Brown
Red*
(+)
(-)
DBR
Black*
Yellow or Green
(+)
(-)
* Additional red and black wire
must be spliced to connect more
than one device.
Connect DC power per
manufacturer's directions
NAV 6000 must be externally
powered to support an external alarm
Connect DC power per
manufacturer's directions
Connecting the DC Power/NMEA Data Cable (Op-
tional)
Electrical Connections
Use the power/data cable to connect the unit to an external
power source and to data devices.
The NAV 6000 accepts 9-32 VDC. It is recommend, but not
required, for a fuse (2A slow blow) to be connected to the
positive lead of the power source. See the wiring diagram to
make the necessary connections. The power/data connector
on the back of the unit has the following pin-out:
External Alarm -
5
1
2
4
3
Ground
Data Output +
Power +
Data Input -