Filter
Top Products
Magellan NAV 6000 41
press the DONE softkey. Press QUIT to exit Route Edit.
The waypoint you created or selected at the cursor posi-
tion has been added to the end of the route.
Appending a Waypoint to the End of a Route Manually
From any root screen, press the ROUTES, LIST softkeys.
Use the CURSOR KEY to highlight the route in which
you wish to append a waypoint to the end and press EN-
TER, MANUAL.
To edit the active route a shortcut is to press
ROUTES, EDIT, MANUAL.
Use the CURSOR KEY to place the highlight at the end
of the route list.
Press ENTER.
Select a waypoint from the list (using the NEARST or
FIND function if desired) and press ENTER. Press DONE,
QUIT to exit Route Edit.
If the list is very long, you may access the Find
Waypoint function in this list by pressing the
FIND softkey. You may also list the waypoints in
order of proximity to the present position by
pressing NEARST.
Moving a Waypoint in a Route
From any root screen, press the ROUTES, LIST softkeys.
Use the CURSOR KEY to highlight the route in which
you wish to move a waypoint and press ENTER.
To edit the active route a shortcut is to press
ROUTES, EDIT.
Use the CURSOR KEY to highlight the waypoint in the
route that you wish to move and press the MOVE softkey.
ROUTES LIST
Highlight
route
ENTER
Move cursor to the last
position in the route
ENTER
MANUAL
Highlight
waypoint
ENTER
DONE
ROUTES LIST
Highlight
route
ENTER
Move cursor to the waypoint
you wish to move
MOVE
Move cursor to the
new position
ENTER