Filter
Top Products
Magellan NAV 600016
Cancelling an Operation
Use the QUIT key to cancel and/or back out of an opera-
tion.
Inputting Data
Use the CURSOR KEY to select menu items as well as
scrolling through alphanumeric series for data entry.
Use the UP/DOWN indicators on the CURSOR KEY to
scroll up and down through the alphanumeric list, stop-
ping on the selection. Then use the RIGHT/LEFT indi-
cators on the CURSOR KEY to move the highlight to the
right or left to continue or correct data entry.
Use ENTER to confirm data entry.
Adjusting Contrast
Use the CURSOR KEY to highlight Contrast and press
ENTER.
A bar graph appears.
Use the RIGHT/LEFT arrows on
the CURSOR KEY to adjust the
contrast to a comfortable level,
then press ENTER to confirm.
Follow the instructions at the bottom of the screen, press-
ing QUIT twice to back out of the Setup and Function
Menu screens and return to the last viewed root screen.
Adjusting Backlighting
Adjust backlighting to two different levels of intensity by press-
ing and releasing the POWER key repeatedly. The intensity
increases incrementally when the POWER key is pressed, and
then turns off the backlight.
Root Screens
The NAV 6000 has five different “root” screens that provide
you with information that you can use for navigating: SAT
STATUS, MAP, NAV 1, NAV 2 and POINTER.
From any root screen, press the
NXT PG
softkey repeatedly
to cycle through the five root screens. The SAT STATUS
screen, MAP screen, NAV 1, NAV 2 and POINTER screens
QUIT
MENU
Highlight
System Setup
Press ENTER
Highlight
Contrast
Press ENTER
Adjust
Contrast
ENTER
CONTRAST
Press the MENU softkey to access the FUNCTION MENU
screen.
Highlight System Setup and press ENTER to access the
SETUP MENU, containing the Contrast option.