Filter
Top Products
Magellan NAV 600040
Removing a Waypoint from a Route
From any root screen, press ROUTES, LIST softkeys.
Use the CURSOR KEY to highlight the route from which
you wish to remove a waypoint and press ENTER.
To edit the active route a shortcut is to press
ROUTES, EDIT.
Use the CURSOR KEY to place the cursor over the
waypoint in the route that you wish to remove.
Press the REMOVE softkey.
The waypoint is removed from the route, however it con-
tinues to exist as a waypoint in the waypoint list and on
the map.
Press QUIT to exit Route Edit.
Appending a Waypoint to the End of a Route on the Map
From any root screen, press the ROUTES, LIST softkeys.
Use the CURSOR KEY to highlight the route in which
you wish to append a waypoint to the end and press EN-
TER.
To edit the active route a shortcut is to press
ROUTES, EDIT.
Use the CURSOR KEY to place the cursor at the position
where you wish to add a waypoint to the end of the route.
The help bar indicates “ENTER to append Quit to exit.”
Press ENTER.
If a waypoint does not exist at the cursor position, the
MARK CURSOR POSITION window appears. Press EN-
TER and use the CURSOR KEY to modify the name,
type and description if desired. When you have finished,
ROUTES LIST
Highlight
route
ENTER
Move cursor to the waypoint
in the route to be removed
REMOVE
ROUTES LIST
Highlight
route
ENTER
Move cursor to the position
at which you wish to append
ENTER
If chosen point is not an existing waypoint, a window will be
displayed to create a new waypoint for that position.