Filter
Top Products
Magellan NAV 6000 39
The cursor must be in close proximity to the
course line in order for the INSERT softkey to be
active on the screen.
Press the INSERT softkey, then use the CURSOR KEY to
move to the exact position you want to insert an existing
or to-be-created waypoint. Press ENTER.
If a waypoint does not already exist at that point, the MARK
CURSOR POSITION window appears.
Press ENTER and use the CURSOR KEY to modify the
name, type and description if desired.
If you want to add an existing waypoint to the
route, you must still move the cursor near the
course line, activate the INSERT softkey, then
move the cursor to the waypoint to insert and
press ENTER.
When you have finished, press the DONE softkey.
The inserted waypoint appears at the position you placed
it on the map. Press DONE to exit Route Edit.
Inserting a Waypoint in a Route Manually
From any root screen, press ROUTES, LIST softkeys.
Use the CURSOR KEY to highlight the route in which
you wish to insert a waypoint and press ENTER.
To edit the active route a shortcut is to press
ROUTES, EDIT.
Press MANUAL and the Routes screen appears with the
first waypoint in the route highlighted.
Use the CURSOR KEY to highlight the waypoint in the
route before which you wish to insert a waypoint and press
INSERT.
The Waypoint list appears. Use the CURSOR KEY to
highlight the waypoint you wish to insert and press EN-
TER. The display returns to the EDIT ROUTE screen
and the selected waypoint has been entered.
Press DONE, QUIT to exit Route Edit.
Move cursor to the waypoint on the route
before which the waypoint is to be inserted
ROUTES LIST
INSERT
Highlight the waypoint to be
inserted in the route
ENTER
Highlight
route
ENTER
MANUAL