Filter
Top Products
Magellan NAV 600058
Simulation Mode Function
When activating the simulation mode, if a route (multileg or
GOTO) is already active, that route will be used for the simu-
lation. If a route is not al-
ready active, the unit will au-
tomatically create a route
that occupies the #25 spot
on the route list. This auto-
matic route consists of way-
points having a starting
waypoint “SIM-POS” sur-
rounded by 8 waypoints aligned to the north, northeast, east,
southeast, south, southwest, west and northwest directions.
The boat icon starts at SIM-POS and navigates to all way-
points.
Press the MENU softkey, use the CURSOR KEY to high-
light Simulation and press ENTER.
Use the CURSOR KEY to highlight Speed and press EN-
TER. Use the CURSOR KEY to key in a value and press
ENTER.
Highlight Heading and press ENTER. Use the CURSOR
KEY to choose between Auto and Manual.
If you choose Manual, you are prompted to enter the head-
ing value. Press ENTER when you have finished.
Use the CURSOR KEY to highlight Simulation Activate
and press ENTER. Use the CURSOR KEY to highlight
On and press ENTER. Press QUIT to exit.
To deactivate simulation mode, simply set Simulation Acti-
vate to Off.
Memory Reset
Three options are available under Memory Reset: Clear Routes
& Waypoints, Load Factory Defaults, and Clear All Memory.
Clear Routes & Waypts is used to erase all existing routes and
waypoints. Load Factory Defaults changes all of the settings
you have customized (units, map settings, etc.) back to the
original factory settings.
Clear All Memory is used only if you wish to erase the last
completed position, time, date and all user-entered informa-
tion, including all waypoints, routes, track and setup. When
Clear All Memory is executed, the menu functions are reset
to their default values.
Press the MENU
softkey, use the CUR-
SOR KEY to high-
light Memory Reset
and press ENTER.
Use the CURSOR KEY to highlight the desired option
and press ENTER.
SIMULATION
Speed 10.0
Heading Auto
Simulation
Activate
Off
Sim Route #25
k
t
Memory Reset
Clear Routes
&
Waypts
Load Factory Defaults
Clear All Memory