Filter
Top Products
Magellan NAV 6000 9
This section will walk you through creating waypoints, creat-
ing a route, editing the route, and, finally, activating the route
you created. The area chosen for this example was intention-
ally selected so that there is little or no land mass to interfere
with the tutorial. You may follow along with your receiver,
just bear in mind that coordinate values displayed in this tu-
torial may differ from the ones you view on your receiver.
Some of the steps and features displayed can be performed in
other manners. The objective here is to demonstrate the cre-
ation of waypoints and routes using the Map Screen.
The first step is to look at the Map Screen we are going to use.
The NAV 6000 has been turned on and the
NXT PG
softkey
pressed, causing the Map Screen to be displayed. Next, the
HIDE
softkey is pressed to allow a larger area of the map
to be displayed.
The cursor is moved with the
Cursor Key until the area in
which the route is to be cre-
ated is displayed.
Use the CURSOR KEY to
move the cursor to the loca-
tion of a waypoint that will
be used in the route.
3
TTutorialutorial