Filter
Top Products
Your GPSMAP system includes the following hardware components:
GPSMAP Unit
Gimbal Mount Bracket (with knobs)
GPS Antenna with 30’ cable
Power/Data Cable
2-amp in-line fuse (included with Power/Data cable)
Antenna Combiner (for GPSMAP purchased with built-in DGPS)
Antenna Coupler and Whip Antenna (for GPSMAP purchased with
built-in DGPS)
If you are missing any of the above pieces, see your dealer. To complete the
standard installation, you’ll also need the following additional:
Four 1/4” (6 mm) diameter mounting screws
1” x 14 thread antenna mounts (Two for GPSMAP with built-in DGPS)
Several optional accessories are also available to provide flexible installation
on any vessel. See your GARMIN dealer for more information on these items:
GA23 H-Field antenna.
Flush Mount Kit
30’ Antenna Cable Extension
110/220 volt AC adapter
Cigarette Lighter Adapter
Reading through the entire installation section before starting your installation will
help you get the most out of your GARMIN navigation system. An improper or poorly
planned installation can affect the GPS receiver’s accuracy, overall performance
and your ability to satisfactorily use the GPSMAP system.
65
WARNING!
The GPSMAP system has no user-serviceable
parts, and you should never attempt any
repairs yourself. The unit is gasket-sealed to
prevent moisture penetration. Opening the
case or loosening any fittings may expose
internal components to moisture and will
void the manufacturer’s warranty!
For warranty and service details, see page iii
at the front of this manual.
SECTION
A
APPENDIX
Installation
I
215225manb.qxd 4/27/00 9:22 AM Page 65