Filter
Top Products
Count Down timer controls an alarm to sound when an entered interval (up to
99:59:59) has expired. Enter a time interval in the time field and use the control
field to the immediate right to run, stop or reset the timer.
Elapsed Timer provides a running clock to 99:59:59. To run, stop or reset the
elapsed time clock, highlight the control field to the right of the timer display,
select the appropriate option.
Clock Alarm provides an alarm for the system clock. Enter a time in the time field
and turn the alarm on and off from the control field menu. Remember to enter
alarm times in the same time format (UTC or local) you’re using for your system.
Anchor Alarm lets you specify an alarm to sound when you’ve exceeded a speci-
fied drift distance. Enter a distance up to 9.9 miles or kilometers in the distance
field and use the control field to turn the alarm on and off.
Arrival Alarm lets you specify an alarm to sound when you’re a specified dis-
tance away from a destination waypoint. Enter a distance radius for sounding the
alarm and use the control field to turn the alarm on and off. If the arrival alarm is
turned off, the alarm will still sound one minute before reaching the destination
waypoint at your current speed and course.
Prox Alarm lets you select an alarm to sound when you’re a specified distance
from a proximity waypoint. Use the control field to turn the alarm on and off.
Proximity waypoints and radius values are entered from the proximity waypoint
list submenu (see page 56).
Off Course Alarm lets you select an alarm to sound when you’re off a desired
course by a specified distance. Enter a distance in the distance field and use the
control field to turn the off course alarm on and off.
51
The timer/alarm setup submenu is used to control the GPSMAP’s various
alarm and timer settings.
SECTION
9
AUXILIARY MENU
Timer/Alarm Setup
215225manb.qxd 4/27/00 9:22 AM Page 51