Filter
Top Products
GPSMAP 620 and GPSMAP 640 Owner’s Manual 35
Marine Mode: Managing Information From Other Vessels
Using DSC Information
To edit or interact with DSC distress calls and position reports,
select a distress call or a position report from the DSC List.
• Edit—add a name to the DSC call or report to help better
identify the vessel by MMSI number.
• Navigate To—set the selected DSC call or report as a
navigation destination. See page 13 for information about
navigating to a destination.
• Create Waypoint—mark a waypoint at the position of the
selected DSC call or report. See page 21 for more information
about waypoints.
• Clear Report—delete the selected DSC call or report.
Adding a DSC Contact
You can add a vessel to your DSC list as a DSC contact.
1. From the Home screen, select Information > Other Vessels >
DSC List > Add Contact.
2. Enter the Maritime Mobile Service Identity (MMSI) of the vessel.
3. Select Done.
4. Enter the name of the vessel.
5. Select Done.
Deleting All Received DSC Information
From the Home screen, touch Information > Other Vessels >
DSC List > Menu > Delete All to delete the list of all received
DSC distress calls and position reports.
Incoming Distress Calls
If your Garmin chartplotter and VHF radio are connected using
NMEA 0183, your chartplotter alerts you when your VHF radio
receives a DSC distress call. If position information was sent with
the distress call, that information is also available and recorded
with the call.
Navigating to a Vessel in Distress
The symbol designates a distress call in the DSC list and marks
the position of a vessel on the Navigation chart at the time the
distress call is sent.