Chrysler 2004 Pacifica Automobile User Manual

prompts as well as the other party’s voice in a conversa-
tion will be played over your vehicle’s stereo system. The
volume of the UConnect™ system can be controlled
through your normal stereo controls.
The radio display will be used for visual prompts from
the UConnect™ system such as caller ID.
Voice commands can be used in the operation of the
UConnect™ system and to navigate through the UCon-
nect™ menu structure. Voice commands should be given
after each UConnect™ system prompt. You will be
prompted for a specific command and then guided
through the available options. There are two ways to give
commands to the UConnect™ system:
You can say ЉDialЉ at the ЉReadyЉ prompt. When
prompted for the phone number you wish to dial, say
the phone number (Љ123 456 7890Љ).
Alternatively as you become familiar with the UCon-
nect™ system, you can combine the commands and
say ЉDial 123 456 7890Љ.
Pairing a Cellular Phone to the UConnect™ System
To begin using your UConnect™ system, you must pair
your compatible Bluetooth™ enabled cellular phone. To
complete the registration process, you will need to refer-
ence your cellular phone owner’s manual.
Press the ’Phone’ button to begin.
After the ЉReadyЉ prompt, say ЉSetup Phone PairingЉ.
You will be asked to say a four-digit pin number into
the UConnect™ system which you will later need to
enter into your cellular phone during the cellular
phone pairing process. You can enter any four-digit
pin number. You will not need to remember this pin
number after the initial registration process.